| 机械型号： Mechanical model | 500P绞线机/strander | ||
| 机器转数: Number of machine revolutions | 一，2500转RPM/5000扭/分 二，3000转RPM/6000扭/分 | ||
| 绞合限度: Stranding limit | ￠ 0.08七根以上铜线绞合￠ 0.08 stranded more than seven copper wires | ||
| 给线径: Feed wire diameter | ￠0.08-0.45 | ||
| 绞合面积: Twisting pith | ￠0.3-3.0平方毫米/￠ 0.3-3.0 square mm | ||
| 绞合断面积: Cross sectional area of strand | 0.035-4MM | ||
| 绞距: Stranding distance | 4.42-39.64-100 | ||
| 卷曲轴: Roll crankshaft | ￠300-400-500 | ||
| 主轴高度: Spindle height | 750MM | ||
| 主机动力: Main engine power | 4KW/5.5HP正弦变频器与广东人民马达全铜/4kw / 5.5HP sine frequency converter and Guangdong people motor all copper | ||
| 绞向: Twist direction | 自由选择向左或向右均可You can choose left or right freely | ||
| 排线装置: Wire arrangement device | 轴承排线器，排距，排幅可任意调整/Bearing wire setter, row spacing, row width can be adjusted at will | ||
| 刹车系统: Brake system | 电磁刹车外部断线时自动刹车或磁粉离合器张力控制器由机外设定（由客户选择）Automatic braking or magnetic powder clutch tension controller is set outside the machine when the external line of electromagnetic brake is broken (selected by the customer) | ||
| 升降系统: Lifting system | 有手动油压或自动升降，由客户选择/There are manual oil pressure or automatic lifting, which are selected by customers | ||
| 整机轴承: Whole machine bearing | 全进口SKF轴承或日本NSK轴承/All imported SKF Bearing or Japan NSK bearing | ||
| 收线张力： Take up tension | 摩擦张力装置，压缩弹簧调整张力（或离合器自动张力收线）Friction tension device, compression spring adjusting tension (or clutch automatic tension closing) | ||
| 自动停机： Automatic shutdown | A、机内，机外断线自动停机；B、自动计米，到米自动停机A. Inside and outside the machine, the machine will stop automatically when the wire is broken; B. the machine will stop automatically when the meter is reached | ||
| 设计： Design | 普通 或电脑触摸屏（由客户选择）Normal or computer touch screen (customer's choice) | ||
| 噪音指数： Noise index | 约75分贝About 75 dB | ||
| 机器尺寸： Machine dimensions | L2650*W1295*H1200 | ||
| 净重： Net weight | 1750KG | ||
所有评论仅代表网友意见，与本站立场无关。